انضم الينا

تسعى شركة نفط الشمال لتُصبح المُشغل النفطي البحري الرائد عالمياً ، وهي تبحث عن كفاءات بشرية من الطراز العالي و ذو الخبرة للانضمام إلى فريق عملنا. وتتبنى الشركة نظام عمليات وتقنيات حديثة ومرتكزه على السلامة، سعياً منا للارتقاء إلى مستوى التحديات التي تضعها البيئة التشغيلية الفريدة لأحد أكبر الحقول النفطية في قطر وأكثرها تعقيداً في العالم.

نلتزم بتمكين الكوادر البشرية من الوصول إلى إمكانياتها الكاملة من خلال القيم الأساسية للشركة المُتمثلة في السلامة و التفوق، والاحترام والثقة والالتزام. تُوفر شركة نفط الشمال كذلك لموظفيها فرصاً مميزة وإمكانات تقدم وظيفي ، فضلاً عن مجموعة مُغرية من مزايا متنوعة.

الوظائف الشاغرة

No available vacancies at this moment

Field Operations

This is a permanent offshore rotation position. The position reports to Operations Team Leader and Offshore Installation Manager with direct subordinates of four Electrical Technicians.

Accountabilities

  • Leading a team of 4 Technicians to support the safe delivery of approximately 40,000 bopd
  • Acting as an Performing Authority to ensure that all Electrical works are carried out in accordance with the Permit to Work process and company requirements
  • Ensuring the timely liquidation of all planned and corrective maintenance activities relevant for the Electrical discipline
  • Providing technical input to key stakeholders related to the execution of campaign and project scopes.

Activities

  • Coordinate logistics, Electrical maintenance and repairs of equipment located on the platform to ensure the normal operation, while following established company procedures and instructions from the Operating Authority
  • Ensure inspections are carried out following the preventive maintenance program to assure the normal operation of the equipment
  • Ensure that any failure or emergency that may interrupt the normal operations of the Electrical equipment is prevented or corrected
  • Create SAP work orders to ensure all materials are added and estimated work hours are correct
  • Coordinate personnel and logistics during maintenance and repair work to assure quality and efficiency
  • Ensure Electrical maintenance backlog is maintained within Company targets
  • Provide field input to modifications, technical upgrades and improvements to support implementation
  • Ensure safe delivery of core business through active management of maintenance activities and core operational activities while also integrating the execution of Maintenance and Well Service Campaigns and E&C activities
  • Provide Operating Authority with feedback in order to improve business performance, improve production uptime, deliver cost efficiencies and reduce risk within Electrical area
  • Participate in the Daily Permit Meeting and ensure teams strict compliance with company requirements and safe execution of all Electrical platform work activities
  • Provide direction, coaching and support to team members to ensure targets are met
  • Motivate and inspire staff in the execution of their responsibilities to drive a performance culture and encourage innovative thinking around process safety and asset integrity
  • Act as an Emergency Response Team Member as per HSE training matrix and platform requirements
  • Represent NOC appropriately and in accordance with code of ethics when interfacing with internal and external stakeholders
  • Promote cost consciousness across entire network of stakeholders in order to embed a strong cost culture.

Qualifications & Experience Required

  • Education: Bachelors of Science in Electrical Engineering field or equivalent
  • Industry Experience: Minimum 5 years’ experience in O&G production operations, or Electrical systems in similar industry.
Competencies and Behaviors:
  • Thorough understanding and application of industry process safety guidelines and procedures
  • Ability to set and implement operational objectives, drive performance and foster a performance culture
  • Highly motivated, flexible in approach and with a proactive mindset
  • Ability to work with large teams in a complex and multic6ltural environment
  • Strong leadership, communication and analytical skills
  • Fluent in written and spoken English
  • Computer literate.
Certifications:
  • Basic Firefighting
  • Basic Cause Tree Analysis
  • Oil Spill Principles and Management Level 1
  • Health and Industrial Hygiene.
All staff must be willing to participate in crisis response training and to assist during emergency response situations if required.

Deadline for submission of applications is on June 26, 2018

Please quote position code when applying

Apply Now

This is a permanent and residential position based in the head office with occasional visit to offshore. The position is situated under Field Operations / Production & Well Performance.

Accountabilities

Provide Al Shaheen  production optimization & operations experience, direction and guidance to the NOC production & well performance team in order to maximize production and injection performance. This position contributes significantly and directly to the field’s ability to meet production budget target through the identification of short term and long term opportunities to improve production performance and well potential, and ensuring Field Ops team is competent in the optimization of the wells whilst ensuring that wells are operating under their operational envelops. The well performance engineer keep the well models up to date and monitor, diagnose and propose solutions for well issues. It is also accountable for the well potential. This position is also in permanent contact with NOC-OC in order to contribute to optimize the production or do some adjustments to the production and injection priority to reach the daily targets. The position is accountable for the continuous well diagnostics and the liaise with reservoir and well services teams in order to propose actions and solutions. The position is in front line on the start-up, clean up and performance evaluation of the new wells.

Activities

HSE:
  • Maintain and improve the safety culture by driving the operation and workplace activities in Incident Free environment.
  • Keep Monitoring the integrity of the wells and report any activities that violating the safe operation envelope of the wells
  • Monitor the pressure conditioning situation and ensure the well communications and fractures are monitored and avoided if possible
Activities:
  • Asses unconstraint and constraint production and injection potential of the wells from their specific location/reservoir and to maintain the performance of wells, within their operating envelopes.
  • Ensure updating the simulation models (GAP/Prosper) and match them with the actual performance.
  • Identify, propose and implement actions for daily production and injection optimization.
  • Identify surveillance and optimization opportunities to increase or restore well potential, using platform based activities (wireline, electric line and coiled tubing, etc.).
  • Maintaining metering and well test data flow assurance and contribute to the review of production data validation, allocation, and reporting.
  • Actively participate in daily communication and coordination between offshore and onshore businesses pertaining to key business matters and sharing of knowledge and experience.
  • Contribute to shortfalls identification by analyzing well production/injection.
  • Contributes to the annual budget by providing the well opportunity and studies to be performed.
  • Recommend interventions and workovers to maintain production capabilities and maximize asset production.
  • Cost optimization and avoidance to ensure best utilization for the company operation budget and resources.

Qualifications & Experience Required

Qualifications
  • Degree : Bachelor or Master’s Degree in Petroleum, Mechanical or Chemical Engineering, or equivalent.
Experience
  • At least 4 years’ proven experience in similar or related roles in the oil and gas environment.
  • Experience in Reservoir Engineering, Production Technology, production Engineering or Well Services.
  • Operational experience.
Technical, Personal Competences
  • Good interpersonal skills – ability to communicate effectively with site personnel, peers and management. Ability to work under pressure and stressing conditions.
  • Fluent in English.
  • Knowledge of Petroleum Experts suite, Visual Basic and Database handling.
HSE Certifications
  • BOSIET and H2H certification.

Deadline for submission of applications is on June 21, 2018

Please quote position code when applying

Apply Now

Senior Electrical and HVAC Engineer (Qatari Nationals only)

This is a permanent and residential position based in the head office with occasional visit to offshore. The position is situated under Field Operations Maintenance and Inspection / Engineering.

Accountabilities

  • Ensure highest safety and technical support in the assessment and recommendations for electrical and HVAC maintenance activities, issue procedures and technical support for its discipline
  • Provide all aspects of electrical and HVAC equipment engineering/technical support and assistance to offshore team, NOC OC, Maintenance support and Shutdown/Campaign entity
  • Responsible for the technical administration of all electrical & HVAC spare parts for Field operation, from its creation to its refurbishment or end of life.

Activities

  • Drive an Incident Free environment / mindset within the team and with all colleagues
  • Promote and implement usage of conditional based maintenance technique within the field of its ownership
  • Review performance acceptable criteria for Safety and Environmental Critical Element under its ownership
  • Perform risk analysis on deferral raised on Safety and Environmental Critical Element under its ownership
  • Suggest action plan and cost estimate on failing Safety and Environmental Critical Element under its ownership
  • Ensure that preventive Maintenance are well aligned with HSE requirement and equipment best reliability and availability
  • Provide input to the team weekly reports, Unio tracker and KPI
  • Provide technical support to FOPS and other NOC colleagues where required.
  • Develop fit for duty maintenance solutions
  • Supply accurate technical clarification on what spares should be purchased within own area of expertise
  • Responsible for replenishment of spare parts stock under its assigned ownership
  • Develop scope of intervention for major preventive and on difficult corrective Maintenance
  • Review and challenge design of brown field modification and greenfield project in term of maintainability.
  • Assist in the development of technical content of discipline maintenance operation to be performed by offshore team, or campaign team or shutdown team
  • Develop scope of execution for minor modification done by Maintenance
  • Review technical solution for major modification done by Engineer and Construction
  • Identify critical situations which may expose NOC to safety or production concerns
  • Analyze recurrent failure and issue solution to improve equipment reliability & availability
  • Coach more junior engineers within the team in their tasks
  • Promote cost awareness and innovation within his/her workscopes
  • Provide technical assistance for the definition of specialized service company
  • Ensure that Discipline stock level are set at right level and replenishment are launch right on time
  • Develop, with the TADM, the technical information required to create, update, block and delete references stored under its technical authority (in particular the General Specifications and QA / QC requirements), in close collaboration with the Stock Controller , specifically replenishment parameters. (MRP Type and MRP parameters).
  • Responsible for new Spare Parts, ensuring they are referenced and attached to their equipment through the BOM in PALM
  • Supply the TADM with the stock preservation operation to be carried out by logistics or specialized company for equipment under own area of expertise.
  • Anticipate obsolescence, generate action plan for mitigation and present to the Lead Engineer
  • Identify opportunities to improve contractor/supplier contracts, reduce costs and improve the quality of services/products supplied.
  • All staff must be willing to participate in Crisis Response Training and to assist during Emergency Response Situations if required.

Qualifications & Experience Required

  • BSc in electrical engineering or equivalent
  • 10 years experience on an oil & gas field with at least 3 years at a senior technical support level and at least 3 years in electrical & HVAC maintenance level
  • Significant knowledge of offshore plant and equipment and maintenance systems
  • Experience in a senior electrical engineering position demonstrating competency in the area of expertise
  • Practical knowledge of maintenance and inspection management tools (SAP module PM & MM)
  • Medically fit to travel to offshore oil & gas platform
  • Results driven approach and attitude.
  • Fluent in English (listening, writing and speaking) and its technical vocabulary.
 

Please quote position code when applying

Apply Now

This is a permanent and residential position based in the head office with occasional visit to offshore. The position is situated under Field Operations Maintenance and Inspection/Engineering.

Accountabilities

Accountable for the development of maintenance engineering solutions to support maintenance execution team with the correct procedures, spare parts and technical specialism in maintenance and engineering of high value, complex rotating equipment.

Activities

  • Drive an Incident Free environment / mindset within the team and with all colleagues
  • Promote and implement usage of conditional based maintenance technique within the field of its ownership
  • Review performance acceptable criteria for Safety and Environmental Critical Element under its ownership
  • Perform risk analysis on deferral raised on Safety and Environmental Critical Element under its ownership
  • Suggest action plan and cost estimate on failing Safety and Environmental Critical Element under its ownership
  • Ensure that preventive Maintenance are well aligned with HSE requirement and equipment best reliability and availability
  • Provide input to the team weekly reports, Unio tracker and KPI
  • Provide technical support to FOPS and other NOC colleagues where required.
  • Develop fit for duty maintenance solutions
  • Supply accurate technical clarification on what spares should be purchased within own area of expertise
  • Responsible for replenishment of spare parts stock under its assigned ownership
  • Develop scope of intervention for major preventive and on difficult corrective Maintenance
  • Review and challenge design of brown field modification and greenfield project in term of maintainability.
  • Assist in the development of technical content of discipline maintenance operation to be performed by offshore team, or campaign team or shutdown team
  • Develop scope of execution for minor modification done by Maintenance
  • Review technical solution for major modification done by Engineer and Construction
  • Identify critical situations which may expose NOC to safety or production concerns
  • Analyze recurrent failure and issue solution to improve equipment reliability & availability
  • Coach more junior engineers within the team in their tasks
  • Promote cost awareness and innovation within his/her workscopes
  • Provide technical assistance for the definition of specialized service company
  • Ensure that Discipline stock level are set at right level and replenishment are launch right on time
  • Develop, with the TADM, the technical information required to create, update, block and delete references stored under its technical authority (in particular the General Specifications and QA / QC requirements), in close collaboration with the Stock Controller , specifically replenishment parameters. (MRP Type and MRP parameters).
  • Responsible for new Spare Parts, ensuring they are referenced and attached to their equipment through the BOM in PALM
  • Supply the TADM with the stock preservation operation to be carried out by logistics or specialized company for equipment under own area of expertise.
  • Anticipate obsolescence, generate action plan for mitigation and present to N+1
  • Identify opportunities to improve contractor/supplier interfaces, reduce costs and improve the quality of services/products supplied.
  • All staff must be willing to participate in Crisis Response Training and to assist during Emergency Response Situations if required.

Qualifications & Experience Required

  • Graduate of BSc in Mechanical engineering or equivalent
  • 10 years experience on an oil & gas field with at least 5 years at technical support level and at least 2 years in Mechanical maintenance level
  • Significant technical design knowledge of offshore plant mechanical equipment.
  • Demonstrate competency in area of specialism
  • Practical knowledge of maintenance and inspection management tools (SAP module PM & MM)
  • Significant knowledge and experience of offshore maintenance procedures
  • Medically fit to travel to offshore oil & gas platform
  • Results driven approach and attitude.
  • Fluent in English (listening, writing and speaking) and its technical vocabulary.
 

Please quote position code when applying

Apply Now

This is a permanent and residential position based in the head office with occasional visit to offshore. The position is situated under Field Operations Division/Methods & Reporting Department.

Accountabilities

The job holder to support all Field Operations entities to:
  • Compile, analyze and interpret data and prepare relevant reports and dashboards on time
  • Administrating the Production Data Management System

Activities

Reporting cycle and action plans
  • Organize FO reporting and ensure its overall coherence: recording, analysis and notification.
  • Define and implement Terms of Reference for daily/weekly/monthly meeting where Field Operations act as a leader.
  • Design, develop, implement and maintain appropriate daily/weekly/monthly reports for Field Operations
  • Define and implement Data flow charts of Role and Responsibilities for daily/weekly/monthly reports for Field Operations
  • Design, develop implement and maintain daily & weekly  site dashboards for Field Operations
  • Establish a governance for the use of dashboards and visual management tools (decision making tools, visual report, visual planning)
  • Handles and organizes large datasets, applies various statistical techniques and prepares reports and presentations to summarize and communicate results to help Field Operations entities make better business decisions.
  • Ensure continuous unicity and visibility of opportunity databases
  • Establish, explain and track performance indicators for Field Operations (Key performance, cost performance)

Business systems, tools and applications software for data reporting

  • In charge to define the specific configuration of reporting methods for Field Operations (users notification, workflows specific to organization, changes in report due to any change in structure of Assets/Organization/Reporting specifications)
  • Interface with IT teams for the adjustment of existing software applications and databases to accommodate changes in workflows and processes
  • Actively contribute to the development of the PDMS based on best practices of O&G companies, including Company’s shareholders.
  • Implement and update the metering and allocation scheme into the Production Data Management System
  • Provides a coherent view of the field through all application software
  • Ensure a strict control of the proliferation of software applications and data formats by developing a framework to host, QC and approve the developments of dashboards and data analysis and date visualization tools within Field Operations

Qualifications & Experience Required

  • 2 years’ experience in a similar role.
  • Previous experience maintaining and working with large data systems and reporting.
  • Good knowledge of Production Data management in the Oil & Gas industry
  • Advanced level in using data analysis and reporting tools, including scripting and code development including Microsoft Excel and other database software applications.
  • Analytical skills to work with large amounts of data: facts, figures, and number crunching. Need to see through the data and analyze it to highlight conclusions.
  • Quality and attention to detail oriented.
  • Able to turn reporting/dashboarding requirements into custom-formatted data reports.
  • Able to work with departmental managers to outline the specific data needs for each business method analysis project
  • Ability to work effectively within an international and multi-cultural environment.

Please quote position code when applying

Apply Now

This is a permanent offshore rotation position. The position reports to Operations Team Leader and Offshore Installation Manager with direct subordinates of four Control & Instrument Technicians.

Accountabilities

  • Leading a team of 4 Technicians to support the safe delivery of approximately 97,000 bopd
  • Acting as an Performing Authority to ensure that all Control & Instrument works are carried out in accordance with the Permit to Work process and company requirements
  • Ensuring the timely liquidation of all planned and corrective maintenance activities relevant for the Control & Instrument discipline
  • Providing technical input to key stakeholders related to the execution of campaign and project scopes.

Activities

  • Coordinate logistics, Control & Instrument maintenance and repairs of equipment located on the platform to ensure the normal operation, while following established company procedures and instructions from the Operating Authority
  • Ensure inspections are carried out following the preventive maintenance program to assure the normal operation of the equipment
  • Ensure that any failure or emergency that may interrupt the normal operations of the Control & Instrument equipment is prevented or corrected
  • Create SAP work orders to ensure all materials are added and estimated work hours are correct
  • Coordinate personnel and logistics during maintenance and repair work to assure quality and efficiency
  • Ensure Control & Instrument maintenance backlog is maintained within Company targets
  • Provide field input to modifications, technical upgrades and improvements to support implementation
  • Ensure safe delivery of core business through active management of maintenance activities and core operational activities while also integrating the execution of Maintenance and Well Service Campaigns and E&C activities
  • Provide Operating Authority with feedback in order to improve business performance, improve production uptime, deliver cost efficiencies and reduce risk within Control & Instrument area
  • Participate in the Daily Permit Meeting and ensure teams strict compliance with company requirements and safe execution of all Control & Instrument platform work activities
  • Provide direction, coaching and support to team members to ensure targets are met
  • Motivate and inspire staff in the execution of their responsibilities to drive a performance culture and encourage innovative thinking around process safety and asset integrity
  • Act as an Emergency Response Team Member as per HSE training matrix and platform requirements
  • Represent NOC appropriately and in accordance with code of ethics when interfacing with internal and external stakeholders
  • Promote cost consciousness across entire network of stakeholders in order to embed a strong cost culture.
The Control & Instrument Supervisor is the offshore owner of key business and safety critical Control & Instrument systems and is overall accountable for all matters relating to the Control & Instrument discipline offshore.  The Control & Instrument Supervisor supports the OTL in all matters related to managing the day to day priorities and ensuring safe delivery of business priorities. A-Site is located approximately 80km NE of Qatar in the Arabian Gulf in an offshore environment with imposing limitations to work delivery. The position is offshore based – on a rotational scheme.

Qualifications & Experience Required

  • Education: Bachelors of Science in Engineering field or equivalent
  • Industry Experience: Minimum 5 years’ experience in O&G production operations, or Control & Instrument systems in similar industry.

Competencies and Behaviors:

  • Thorough understanding and application of industry process safety guidelines and procedures
  • Ability to set and implement operational objectives, drive performance and foster a performance culture
  • Highly motivated, flexible in approach and with a proactive mindset
  • Ability to work with large teams in a complex and multicultural environment
  • Strong leadership, communication and analytical skills
  • Fluent in written and spoken English
  • Computer literate.

Certifications:

  • Basic Firefighting
  • Basic Cause Tree Analysis
  • Oil Spill Principles and Management Level 1
  • Health and Industrial Hygiene.
All staff must be willing to participate in crisis response training and to assist during emergency response situations if required.

Deadline for submission of applications is on June 21, 2018

Please quote position code when applying

Apply Now

This is a permanent and residential position based in the head office with occasional visit to offshore. The position is situated under Field Operations Maintenance and Inspection/ Contracts & Quality.

Accountabilities

  • To support the Management of Contracts & Quality section to meet objectives and KPI’s set by NOC Management.
  • To coordinate the optimisation of Maintenance and Inspection work processes and tools.

Activities

  • Support at the OC room development and Obeya room set-up in relation to Maintenance and Inspection processes.
  • Follow up the development of KPI’s for the Maintenance and Inspection Department.
  • Contribute at the Babelfish development by Maintenance Engineering section to ensure all system functionalities are used and information inserted are valid for use.
  • Review the Unio structure, propose improvement, review posted information and ensure accuracy.
  • Set up the Maintenance and Inspection Intranet page, ensure relevant information is populated.
  • Follow up the Maintenance complexity index development and assess its impact on maintenance levels.
  • Set up the Maintenance and Inspection action plan, review content for update, identify backlog and set up efficient reporting tool.
  • Attend QP workshops, prepare required presentations, follow up actions and reporting tool.
  • Attend 4C&D workshops, follow up implementation for Maintenance and inspection, set up saving reporting tool and coordinate with various Department sections.
  • Prepare short presentation for saving, communicate feedback to Maintenance and Inspection organization
  • Support at the reporting of progress on baseline review actions, follow up late activities with responsible people, set up a completion plan and a reporting tool.
  • Support at the Maintenance and Inspection procedures set up and review, ensure CMS is updated as required.
  • Ensure process flows are developed as required, keep a master reference document, and review to identify any conflicts.
  • Liaise with offshore Maintenance team to set up an efficient reporting tool for daily activities.
  • Review planning achievement against plan and efficiency against available manpower and propose improvement.
  • Review the 5 weeks Maintenance Plan and the 4 months Maintenance plan and propose improvement

Qualifications & Experience Required

  • Degree or industry recognized technical qualifications supported by significant years of industry experience (Onshore and Offshore Oil & Gas Facilities).
  • Minimum of 5 years’ experience working in the Oil & Gas industry.
  • Broad understanding of offshore Oil & Gas facilities Operations and Maintenance Management requirements.
  • Culturally aware and able to operate in a multi-cultural environment.
  • Versatile, resilient and able to interact effectively with direct / indirect reports, peers and Senior Managers on a daily basis.
  • Excellent interpersonal skills.
  • Excellent written and oral communication skills. (English)
  • Industry recognized training and professional certifications.
  • Engineering fresh graduates are welcome to apply.

Please quote position code when applying

Apply Now

Corporate Planning & Development

Scope of Work

This position is situated under the Corporate Planning & Development Manager. The job Holder will provide the required administrative and secretarial support to the Corporate Planning & Development Manager/Division.

Activities

The secretary of the Corporate Planning & Development Division is expected to perform the following activities:
  • Carry out a wide range of administrative and office support activities for the CP&D Manager and the Division, to facilitate efficient operations.
  • Maintain strict personal confidentiality and ensure that all information, written and verbal, obtained in the course of the work is handled in strict confidence.
  • Draft and modify documents in a timely manner with a high degree of accuracy, including emails, internal/external correspondence, reports, presentations, dashboards and memos at the request of the CP&D Manager
  • Building on relationships with external parties and internal support functions
  • Create and maintain an efficient document control and filing system for the CP&D Division, particularly for incoming / outgoing correspondence, working with CP&D division to ensure that no duplication exists. All information relating to administration and records management, is recorded and filed in the appropriate locations
  • Manage the CP&D Manager’s calendar and provide support with the scheduling and coordination of meetings, appointments and meeting room bookings.
  • Maintain annual leave and absence records for the Division.
  • Screen telephone calls, take messages, prioritize calls and redirect as necessary
  • Act as first point of contact for visitors, control the movement of incoming and outgoing visitors ensuring that they are escorted at all times.
  • Actively participate in CP&D Division Meetings and provide minutes and actions during management meetings and follow up on a regular basis. All weekly and monthly reports/minutes are up to date with no outstanding actions.
  • Carry out customary administration and paper work processes (photocopy/scan dispatch and filing of documentation)
  • Organize and actively contribute to the organization of meetings/team events. Work in close conjunction with the Public Relations department to ensure smooth running of all external events where the CP&D Division is presented.
  • Coordinate the reservation of meeting rooms for the Division and the availability of food and drinks etc. as required
  • Management of CP&D Travel and logistical arrangements and itineraries.
  • Prepare business cards, stamps and other related work order requests
  • Prepare purchase orders, request tickets, book hotels and prepare/check expense reports/visit programs/gate passes etc. for visitors
  • Maintain the division leave schedule and generate leave reports on a regular basis
  • Ensure that the division has an adequate stock of stationery items at all times by Liaising with Contracts & Procurement and placing orders when necessary
  • Coordinate the maintenance of the office/equipment via General Services and Information Solutions Divisions
  • Coordinate requests for the on boarding of new comers (IT requests, access cards,…) with General Services and Information Solutions division
  • Daily administration support to the CP&D Division.
  • Drive an incident free environment through establishing and maintaining a strong safety culture.
  • Ensure all activities and work under the remit of the CP&D division are performed with an Incident Free mindset.
  • Act as a safety role model from an Administration perspective, both onshore and offshore.
  • Develop and own a Personal Development Plan (PDP) to cover personal ambitions, aspirations and competencies for a period not less than 10 years;
  • Uphold and be a role-model for the NOC Company Core Values and leadership behaviors
  • Ensure all Administration related deliverables are in compliance with the Local Management systems
  • In addition to own area of responsibility, support the business activities as required;

Profile requested

  • Qualification: Bachelor’s Degree, diploma or studying towards an equivalent qualification.
  • Professional Experience: 10 years minimum of Secretarial and office management experience
  • Mastery of Microsoft office products (PowerPoint, Word, Excel, etc...)
  • Proficiency in Secretarial and office management activities
  • Logistics management
  • Oil & Gas experience is a must
  • Fluent in English ( Verbal, written and spoken),
  • Able to work under pressure and meet deadlines, customer oriented, organised, flexible, open to other cultures, autonomous, good team player, pro-active, high attention to details, good problem solving skills, strong communicator
 

The deadline for submitting application is 26th of June 2018.

Please quote position code when applying

Apply Now

Contracts & Procurement

Scope of Work

This position is situated under the C&P Product Line Head. The job holder will:
  • Supervise processes to produce contractual documentation
  • Supervise and ensure that the production of contractual documents is done according to company procedure and ethics
  • Produce contractual documents according to company procedure and ethics
  • Provide a quality, cost-effective and time efficient contracts service to technical entities
  • Participate in the optimization of the economic performance of the operations conducted in NOC

Activities

The Job holder liaises with Technical entities and participates to the processes and communication of the contracts entity by performing the following tasks:
  • Introduce contracts practices and/or procedures for the establishment of contractual documents, in cooperation with the Partners entities
  • Supervise and train contract engineers through field training
  • Help manage the workload, the assignments and competences update of his/her team of Contract engineers and contract administrators
  • Keep informed or best practices in contracts procedures in other entities for improvement of contracts practices in NOC
  • Ensure that all insurance issues of company assets and personnel are dealt with
  • Use frame agreements signed by shareholders
The Job holder executes the following contracts activities:
  • Prepare and maintain an up-to-date list of qualified contractors/suppliers/potential tenders/contracts with updated information in order to perform market studies
  • Take a leading role in the validation of the contracts strategy through:
  1. Arranging and attending Contracts Committee Meetings
  2. Pre-qualifying bidders
  3. Defining target prices
  4. Defining criteria for evaluation
  5. Supervise the creation of CFT commercial documents
  • Supervise the preparation and issue of the call for tender to contractors and suppliers on the bidders list
  • Ensure the preparation and send out the dossiers of pre-consultation and Standard or Complex invitations to bid
  • Verify the alignment with HSE clauses, Company rules, Procedures, Instructions and applicable legislation when issuing all technical contracts and when drafting contractual and commercial terms and conditions
  • Verify the Terms & Conditions (standard, general and financial)
  • Supervise the establishment of the technical contracts and contractual agreements, directly participate to the most complex contracts
  1. Participate in terms & conditions and commercial bid complex analysis and negotiations to ensure that a clear definition of responsibilities is developed
  2. Assume a leading role in RTAs through managing in Contract committees and award validation and RTA evaluations
  3. Handle the approval from authorities and partners, clarification of rights and obligation of signing parties and the signature process of formal documents
  4. Intervene in the settlement of claims and lawsuits, in relation with the Juridical, Insurance, Finance and NOC management by proposing strategies and actions and participating to the negotiations
  5. Ensure monitoring of on-going contracts status, participate in contract renewal and amendments discussions
  6. Review supplier performance
The Job holder ensures Contracts compliance
  • Ensure that all local contracts personnel under his/her supervision is in line with the company’s standardized norms and codes of conduct
The Job holder adheres to the H3SE rules
  • Take the necessary measures to avert immediate threat of danger. Exercising caution as necessary to avoid danger to persons and installations
  • Participate actively in H3SE meetings, training sessions and drills and co-operate actively in the execution of H3SE plans

Profile Requested

  • Bachelor’s degree in technical discipline required
  • Masters in a technical discipline is preferred
  • Minimum of 10 years working experience in contracts within Drill & Wells field.
  • Knowledge of SAP & Ariba
  • More than 8 years’ experience in contract.
  • Personal Abilities: Advanced Management, Advanced Human Relations, Problem Solving and Planning / organizing / coordinating / controlling
 

The deadline for submitting Application is 21th of June, 2018

             

Please quote position code when applying

Apply Now

Scope of Work

This position is situated under the Contracts & Procurement Manager. The job owner will
  • Monitor CPC & CPAC administration activities
  • Monitor External commitments documentation safe storage, correct archiving and manage related confidentiality issues
  • Assist Head of C&P in relationships with NOC shareholders and monitor C&P requests for shareholders services
  • Ensure and assist the Head of C&P in current administrative tasks related to C&P entity and personnel

Activities

The Job holder participates to the functioning of the C&P department by performing the following activities:
  • Coordinate and assist the Head of C&P in the organisation and in the administrative tasks related to Contract and Procurement Committee (CPC) and Contracts and Procurement Advisory Committee (CPAC)
  • Ensure good monitoring of requests for services to NOC shareholders and assists the Head of C&P in the relationships with these shareholders and potential other authorities
  • Regarding domain and nature of activities performed by C&P, the executive secretary shall ensure a complete confidentiality of information and security of critical documentation by putting in place and monitoring a safe storage and archiving of all Contracts/Orders and related documentation
  • Organise and actively contribute, to the organization of meetings/team events
  • Take notes during key management meetings in order to produce Minutes of Meeting in a timely manner.
  • First point of contact for visitors, controls movement of incoming and outgoing visitors
  • Manage occupancy of meeting rooms and coordinate the required arrangements for meetings (orders food and drinks etc.)
  • Screen telephone calls, take messages and redirect as necessary
  • Record in an appropriate filing system and dispatches incoming and outgoing mail/reports through appropriate channels
  • Carry out basic administration and paper work process (photocopy/scan despatch and filing documentation)
  • Organise a yearly archiving for the Division
  • Manage the POB of the C&P team, maintains the team planning and ensure its accessibility for the C&P team
  • Manage of sending correspondences to external third parties or internal correspondents
  • Prepare Memos , letters, presentations on demand of the Head of C&P
  • Prepare mission orders, requests tickets, books hotels and prepares/checks expense reports/visit program/gate passes etc. for visitors
  • Coordinate with relevant departments for visa requests, drivers logistics etc. and communicates on the booking status
  • Prepare Mission Orders for C&P personnel and coordinate with HR/GS for the flight tickets, hotel booking requests and car rentals
  • Check stationary stocks. Liaises with appropriate department to make orders when necessary
  • Liaise with relevant departments to maintain machines like copiers, lights, ac’s and storing consumables for the machines
  • Prepare business cards, stamps and other related work order requests
  • Coordinate with General Services the requests for the on boarding of new comers (IT requests, access cards,…)

Profile requested

  • Minimum Bachelor' degree
  • SAP knowledge is a plus
  • Professional experience: >5 years’ experience, Oil & Gas experience is a plus.
  • Mastering of Microsoft office (PowerPoint, Word, Excel, etc...)
  • Logistics management
  • Fluent English and Arab languages a must
  • Able to work under pressure and meet deadlines, customer service skills, organised, flexible, open to other cultures, autonomous, good team player, pro-active.
  • Willing to participate in and undergo training in emergency response situations.
The deadline for submitting application will be 17th of June 2018.

Please quote position code when applying

Apply Now

Engineering and Construction

Scope of Work

 This position is situated under the Lead Brownfield Projects. The Senior Brownfield Projects Engineer is a senior level appointment and will hold a commensurate amount of responsibility:
  • To deliver a mixed portfolio of small to medium sized Brownfield Projects, via the application of the project maturation processes and standards.
  • To drive an accident free environment, maintaining a strong safety culture; compliance with HSE rules.
  • To plan and budget the Brownfield Projects works related to Al Shaheen field.
  • To deliver Brownfield Projects safely, on time, to budget and to the required level of quality.

Activities

Responsible for running the Brownfield Projects activities to the works related to the Al Shaheen field, including:
  • To drive an incident free (IF) environment in the development, planning and execution of projects.
  • Uphold and be a role model for the company’s core values and Incident Free behaviours.
  • To ensure compliance with HSE (occupational and process) legislation, Company standards and procedures as they apply to project management and project engineering, to ensure employee safety and legislative compliance.
  • To ensure compliance with Company Management System and applicable International Standards.
  • To review and to approve deviations to NOC standards.
  • To prepare Project Execution strategy and Project Execution Plan. Manage Project to through Operations handover and full close-out.
  • To plan the works in accordance to prioritization agreed with the Brownfield Projects Lead, based on safety, production and future development needs.
  • To prepare, obtain approval of and manage project budgets. Maintain project cost and schedule estimates as required in line with project stages
  • To prepare progress and cost reports and forecasts are maintained and distributed to line manager and key stakeholders.
  • To review and finalise Contractors’ Cost, Time and Resource estimates.
  • To ensure appropriate reviews are carried out, such as HAZOP, HAZID constructability & design, to ensure Project risks are identified & managed.
  • Manage change of scope appropriately and conduct an assessment of resulting cost and schedule impact.
  • To interface with other departments in E&C, FOP…to ensure close collaboration to meet business objectives.
  • To deliver a consistent dossier (documents, materials, procured and fabricated items, precom/com dossiers …) to the E&C Brownfield Projects Coordinator for the offshore Brownfield Projects activities.
  • Management of the procurement activities, including preparation & submission of contract strategies, in conjunction with C&P.
  • Ensure a lessons learned are carried out, communicate to relevant parties and actions are completed.
  • To provide support to other departments in E&C to justify the estimations to the clients, assets or partners.
  • Mentor, guide and act as role model for Brownfield Projects Engineers.
  • To carry out any other duties or tasks that may be assigned by his hierarchical superiors.

Profile Requested

  • Engineer with more than 10 years’ experience in O&G facility design, construction, project management or operations.
  • Engineering Degree from internationally recognised University, plus recognised professional certification.
  • Good knowledge of industry best practice in Project Management.
  • Fluent in English.
 

The deadline for submitting Application will be 23rd  of June 2018

Please quote position code when applying

Apply Now

التقطير

تلتزم شركة نفط الشمال التزاما راسخاً بتوظيف وتطوير المواطنين القطريين الموهوبين دعماً لأهداف رؤية قطر الوطنية 2030. وسيحظى القطريون بإمكانية الوصول إلى الفرص الوظيفية بشكل سلسٍ وذلك من خلال الاستفادة من النمو السريع لشركتنا فضلاً عن الاستفادة من علاقاتنا الدولية الهامة.